fortressfloorcoatings@gmail.com☎ (850) 860-1181
Fortress Floor Coatings of NWFL

Current Pricing Sheet

Floor Coating

Valid For ThroughRevisedDoc ID

Durable, beautiful epoxy, polyurea, and polyaspartic concrete floor coatings in just one day — backed by our Limited Lifetime Warranty. Serving Northwest Florida.

Price your floor

Coating system

Residential garage with a coated concrete floor

The coatings, in detail

Full Polyurea / Polyaspartic System

01 / The flagship one-day install

Full Polyurea / Polyaspartic System

A polyurea base coat, a full broadcast of decorative vinyl flake, and a polyaspartic clear topcoat. Installed in a single day and backed by our Limited Lifetime Warranty.

Best for
Attached garages, showpiece garages, and any homeowner who wants a lifetime finish with a one-day install.

Pros

  • Walk on in 24 hours, drive on in 48 hours
  • Limited Lifetime Warranty
  • Flake layer hides slab cracks and repairs
  • Hot-tire proof and UV stable

Trade-offs

  • Highest cost residential tier
  • Color is locked to available flake blends
  • Requires a trained crew, not a DIY system
Prep
Full diamond grind, crack chase, joint fill, moisture test
Cure
24 hours to walk, 48 hours to drive
Lifespan
15 to 20 years
Maintenance
Rinse with water, mild soap as needed, no harsh solvents
Decorative Flake Broadcast

02 / The most popular residential finish

Decorative Flake Broadcast

Vinyl color chips broadcast to refusal into a wet base coat, then sealed under a clear topcoat. Endless color blends, built-in slip resistance, and it hides slab imperfections better than any solid color system.

Best for
Two and three car garages, patios, pool decks, and any floor that will take real foot traffic.

Pros

  • Hundreds of color blends to match the home
  • Built-in slip resistance from the flake texture
  • Hides cracks, patches, and minor slab flaws
  • Easy to sweep and rinse clean

Trade-offs

  • Texture you can feel underfoot
  • Priced above a plain solid color
  • Requires skilled broadcast technique for even coverage
Prep
Diamond grind, crack chase, optional integral cove base
Cure
24 hours to walk, 48 hours to drive
Lifespan
15 to 20 years
Maintenance
Sweep weekly, rinse quarterly, spot clean spills
Polyaspartic Solid Color

03 / Solid color, crystal clear topcoat

Polyaspartic Solid Color

A high-performance aliphatic resin used as a solid color finish or as the clear sealing layer over another system. 100% UV stable, scratch resistant, and cures fast enough to walk on the same day.

Best for
Commercial spaces, workshops, and homeowners who want a clean solid color without flake texture.

Pros

  • Will not amber or yellow in sunlight
  • Scratch and chemical resistant
  • Crystal-clear gloss or satin finish
  • Fast cure keeps the project on schedule

Trade-offs

  • Premium pricing over standard epoxy
  • Thin film, always paired with a base or primer
  • Sensitive to humidity during install
Prep
Diamond grind over cured base or primer
Cure
24 hours to walk, 48 hours to drive
Lifespan
15 to 20 years
Maintenance
Damp mop as needed, avoid abrasive pads
Metallic Epoxy

04 / The showroom floor

Metallic Epoxy

Pearlescent metallic pigments suspended in a 100% solids epoxy, hand-worked to create depth, swirls, and a liquid-marble effect. Every install is one-of-one, then sealed under a UV-stable polyaspartic clear.

Best for
Statement garages, retail floors, salons, and finished workshops.

Pros

  • Show-stopping visual depth and movement
  • Seamless and fully waterproof
  • Custom artistry, no two floors alike
  • Premium retail and showroom look

Trade-offs

  • Longer cure, not a one-day install
  • Requires a UV-stable topcoat
  • Artistic finish, exact pattern cannot be guaranteed
Prep
Diamond grind, tinted basecoat, hand pigment work
Cure
24 hours to walk, 48 hours to drive after topcoat
Lifespan
10 to 15 years
Maintenance
Damp mop, avoid dragging heavy tools across the surface
Polyurea Base Coat

05 / The base layer of a real system

Polyurea Base Coat

Fast-set, flexible, deeply penetrating resin used as the bonding base coat in a same-day system. Roughly four times more flexible than epoxy and installs in a wide temperature range — a match for Northwest Florida.

Best for
The primer and adhesion layer under a flake broadcast or a polyaspartic topcoat.

Pros

  • Cures in hours, not days
  • Roughly four times more flexible than epoxy
  • Penetrates and mechanically locks to concrete
  • Installs from 40 to 110 degrees F

Trade-offs

  • Short working time, professional install only
  • Rarely used as a standalone finish
  • Higher material cost than epoxy
Prep
Diamond grind to CSP-2 or CSP-3 profile, crack repair
Cure
24 hours to walk, 48 hours to drive once system is complete
Lifespan
10 to 15 years
Maintenance
Not exposed once system is complete
Standard Epoxy

06 / The budget workhorse

Standard Epoxy

A two-part 100% solids epoxy resin rolled or troweled over prepped concrete. The most affordable resin system and the most forgiving on imperfect slabs, at the cost of a slower cure and less UV stability.

Best for
Detached garages, workshops, and utility spaces where budget outranks longevity.

Pros

  • Lowest entry cost of any resin system
  • High-build fills minor pits and low spots
  • Strong chemical resistance
  • Wide range of solid colors

Trade-offs

  • Ambers and yellows under UV exposure
  • Multi-day cure before vehicle traffic
  • Brittle compared to polyurea
  • Hot-tire pickup if not cured correctly
Prep
Diamond grind, crack chase, patch
Cure
3 to 7 days before vehicle traffic
Lifespan
5 to 10 years
Maintenance
Sweep and damp mop, plan for a refresh coat around year 5
Call for your free estimate · (850) 860-1181We have promotions and can work within anyones budget.